ThermaData Wireless Data Logger WTBC

Associated Product

ThermaData Wireless Data Logger Base Station

The RF Wireless Data Logger Base Station is supplied with starter magnet and software and connects to your PC via the USB port, enabling up to 16 loggers to run simultaneously. Each logger can transmit the recorded data to the base station via radio frequency.

You may also be interested in

Data Logger Probe- General Purpose

This pointed stainless steel penetration data logger probe is suitable for a wide variety of remote monitoring applications, when used in conjunction with the WTBC and WTB1C models of wireless data loggers.This probe has a response time of less than 2 seconds and a maximum probe temperature of 125°C.

Air or Gas Data Logger Probe

This stainless steel, fast response air or gas data logger temperature probe is ideal for measuring air temperature in chill cabinets, fridges/freezers, offices, storage areas and more.

ThermaData Wireless Data Logger Base Station

Your shopping basket is empty. Please browse or search.

Code

Price

In Stock

WT501

£139.99 inc VAT

Quantity Discounts

£134.52 inc VAT

£131.69 inc VAT

Add to Basket

The ThermaData Wireless Data Logger WTBC incorporates an external interchangeable NTC thermistor sensor with a one metre PVC/PFA lead and can reduce the time spent taking manual temperature readings.

The WTBC records temperature over the range of -40 to 125 °C and records up to 16000 readings. Utilising the latest technology, these loggers provide cost effective temperature monitoring for recording the temperature of appliances and buildings in a variety of different industries.

They have a range of up to 100 metres (line of sight), and up to a maximum of 16 ThermaData wireless loggers can be used at any one time. Each logger incorporates a red and green LED, the flashing green LED indicates that the logger is active/logging and the flashing red LED indicates that your customised pre-set alarms have been exceeded.

The wireless data logger works by transmitting the recorded data via radio frequency to a receiver connected to a PC. The ThermaData RF base station is required to enable the user to upload data or download programme information to each logger (sold separately).

Each data logger is housed in a waterproof, ergonomic case that is designed to meet IP66/67 protection and have a self-contained, battery powered unit that can receive, log, store and transmit data to the RF receiver.

Additional internal and external temperature sensor/ probes can be used with these data loggers. The external probes can be either fixed or detachable via a waterproof three-pin connector.

Specification:

Range: -40 to 85°C internal or -40 to 125°C external
Resolution: 0.1 °C or °F selectable
Accuracy: ±0.5 °C
Memory: 16000 or 2 x 8000 readings
Sample rate: 0.1 to 255 minutes
Antenna: internal 50 W omni-directional multi layer chip
RF range: <100 metres line of sight
Transmission rate: 0.1 to 255 minutes
Radio frequency: 868 MHz (licence free)
Battery: 3.6 volt ½ AA lithium
Display: 2 LED's
Dimensions: 76 x 23 mm
Weight: 80 grams approx

A range of data logger probes are available for use with this product including a general purpose probe, air or gas, surface patch temperature probe and food simulant probe. For full details, please browse our Thermometer Probes section.

Share |

A Front to Back Web Design